|
© 2023 Billy Carmen and ChatGPT
 Woodworkers are using tools like the Lumber Wizard 5 to detect buried metal in wood. It's important to take precautions to prevent damage to tools and injury to individuals who may come into contact with the wood. While there are more expensive and sophisticated metal detectors available that can detect metal buried deep into in logs, it's good to know that the Lumber Wizard 5 is an affordable option that can still provide a valuable level of protection. It's always important to prioritize safety and invest in the right tools to get the job done efficiently and safely. Tips for using the Lumber Wizard and the Little Wizard. Always use a new 9-volt battery and allow your Lumber Wizard 5 to power on and auto-tune. For a Little Wizard use a new battery and tune manually. Test both detectors on small metal objects by passing them under the detectors coils. In the Lumber Wizard the coil is about 6 inches long and is located at the end ofthe wand. The Little Wizard coil is about 2 inches long and is in the head of the unit. Once the detector is powered on steadily sweep the detector as close to the surface as possible. When a beep is heard metal is present directly under the detectors coil. For the Lumber Wizard 5 a laser will illuminate and a beep will sound when metal is detected directly underthe coil. For best results in detecting metal in buried wood sweep the detector in both directions and both angles. If planing in various depths always scan before each pass through the planer or jointer, router, etc. If using for whole logs remember the dectection distance is limited to about 1/2" to upwards 2 inches for average nails to up to 4 inches for larger things like a small crescent wrench to about 6 inches for a monkee wrench. Always scan log after each pass though sawmill. When using the detector, make sure to move it slowly and steadily over the wood surface. This will help ensure that you don't miss any buried metal. Be aware that the detector may also pick up on other materials that are conductive, such as certain types of rocks or minerals. If you're unsure about whether a signal is from metal or something else, try passing the detector over a known metal object to confirm that it's working properly. Keep in mind that the Lumber Wizard 5 and Little Wizard are not foolproof, and there may still be instances where metal goes undetected. It's always a good idea to inspect your wood carefully before working with it, especially if it's reclaimed or salvaged wood that may have hidden surprises. Finally, make sure to follow all manufacturer instructions and safety guidelines when using the Lumber Wizard or Little Wizard. These tools can be a valuable asset in detecting hidden metal, but they should always be used properly and with caution to prevent injury or damage. Little Wizard II Denailing Metal Detector
$34.95
The Little Wizard was created by @BillyCarmen beginning 1999 and are the only metal detectors created specifically for woodworkers to us when denailing reclaimed wood. Like any specialized tool this detector requires proper tuning and understanding of how to properly use. It's a Wizard but it is not magic!!! It's a real life metal detector that works very well when used as suggested. So please read and understand the directions. We are here 100% if you need. For Best Detection Requires NEW 9 volt battery with at least 8.6 volts. We suggest Duracell (not lithium batteries). Please do not just grab a battery out of your drawer and flop in. Save yourself time and detect metal with a brand new shiny full strength Duracell (non lithium) battery. A fresh battery is your best friend in metal detection!!! The Little Wizard is a precision hand held metal detector designed especially for woodworkers to use when denailing reclaimed wood. Perfect for scanning recycled wood for denailing to help find screws and nails before planing, routing, sanding or sawing, and other forms of metal detection. The Little Wizard accurately indicates metal buried inside recycled wood by emitting a high pitch beep tone and illuminating an array of LED's. The Little Wizard can pinpoint the exact location of metal. No guessing, extensive physical searching or unnecessary visual searching is needed with the Little Wizard for denailing. The Little Wizard is widely used by woodworkers everywhere for denailing reclaimed wood. It will save your steel woodworking blades and knives. It's small size and unique detection strength allow it to be used to quickly detect damaging nails, screws and other dangerous metal buried inside of wood. The Little Wizards adjustable sensitivity makes pinpointing easy and accurate. The Little Wizard precisely indicates metal by emitting a high pitch beep tone and illuminating an array of LED's. There's simply no better economical, portable metal detector made for helping with denailing wood. Lumber Wizard 5 Denailing Metal Detector
$149.95
The Lumber Wizard 5 denailing metal detector with laser is a wand type metal detector that is designed to alert woodworkers whenever a metal object such as a nail, pin, bolt, wire, staples, etc. are buried inside wood. By sounding an immediate alert, the user is able to quickly locate then retrieve the metal object so as to prevent injury or tool damage. A laser line indicator illuminates when detection events occur, thereby allowing user to easily see where metal is buried. Regular use of the device will help to reduce damages of tools and injuries. New for 2019.... The Lumber Wizard 5 Laser Line is the latest version of Wizard Industries' flagship woodworking metal detector for denailing. A powerful precision hand-held metal detector with automatic tuning and a laser indicator designed specifically for woodworkers, It helps to speed denailing to detect small metal objects hidden inside new or used lumber. The new version features easier one-handed use, with automatic calibration every time the unit is turned on, and better false-positive rejection. Undetected nails, screws or other metal fragments when denailing can damage expensive jointer, planer and saw blades. Flying metal can also cause serious injury. Easy to use, the Lumber Wizard 5 helps woodworkers prevent equipment damage and personal injury. The Lumber Wizard has received rave reviews for denailing for over two decades from woodworkers and magazines across the country, and the new 5 version is even better! Automatic Tuning each time detector is turned on. Laser Line Indicator Projects Red Line onto scanned surface when metal is found. Helps pinpoint nails, screws, bullets and wire inside new or used lumber. Helps prevent costly blade damage and shop down time when denailing Quickly scan any size wood. Not affected by moisture content of wood. 6" wide scanning area. Durable, sturdy plastic casing. One 9 volt battery required. 1 year warranty. A new fully charged 9-Volt battery commonly for days of daily constant use. Indications of a low 9-volt battery voltage are inconsistent detection or flashing alternating LED's. Always Use A New 9-Volt Battery. A fresh fully charged battery provides the most detection strength and uses time. A partially charged battery can cause false readings, less detection depth, and inconsistent laser. A fresh, fully charged 9-volt battery provides more than ample use time and better denailing. A low battery can cost you blades, material, and lost time...... Length, 15"; width, 3-1/8"; height 1-1/8"; weight, 13 oz. Detects nails, screws, wire, bullets, and other metal objects inside recycled wood Quick, one-handed operation 6"-wide scanning area for faster scans A Powerful Metal Detector Designed Specifically For Wood Workers! The New LUMBER WIZARD 5 Auto-Tuning Laser Line Woodworking Metal Detector is the latest version of Wizard Industries' flagship woodworking metal detector.
0 Comments
Leave a Reply. |
ScribesWritten by ChatGPT with guidance from Billy Carmen. Past Blog Posts
June 2023
|